Inovance MD800 Series - FD: Communication Parameters

Parameter Group
-68-
Min.:
0
Unit:
s
Max.: 0 Data type: UInt16
Default:
0
Change: Unchangeable
Value Range:
-
Description
Total power-on time (second) upon the 1st fault
1.6 FD: Communication Parameters
FD-00
RS485 baud rate
Address:
64768
Min.:
0
Unit:
-
Max.: 9 Data type: UInt16
Default:
5
Change:
At stop
Value Range:
0: 300 bps
1: 600 bps
2: 1200 bps
3: 2400 bps
4: 4800 bps
5: 9600 bps
6: 19200 bps
7:38400 bps
8: 57600 bps
9: 115200 bps
Description
Defines the speed of data transmission between the host controller and AC drive. A higher baud rate
indicates faster communication.
Note that the baud rate of the host controller must be the same as that of the AC drive. Otherwise,
communication will fail.
FD-01
RS485 data format
Address:
64769
Min.:
0
Unit:
-
Max.: 7 Data type: UInt16
Default:
0
Change:
At once
Value Range:
0: No check (8-N-2)
1: Even parity (8-E-1)
2: Odd parity (8-O-1)
3: No check (8-N-1)
4: No check (7-N-2)
5: Even parity (7-E-1)
6: Odd parity (7-O-1)
7: No check (7-N-1)