Inovance MD800 Series - User-Defined Parameters

Function Applications
-547-
Related Parameters
Para. No. Name
Default
Value Range Description
FP-06
Local parameter
backup mode
1
0: Back up all parameters
1: Back up non-motor
parameters
Parameters to be backed up
FP-07
Local parameter
backup
operation
0
Ones: Axis number
1 to 8
Tens: Backup operation
1: Read
2: Write
Axis (1 to 8) to be backed up and backup
type
4.9.2 User-defined Parameters
Group FE consists of user-defined parameters (FE-00 to FE-29). Users can define commonly used
parameters for easier check and modification. Up to 30 user-defined parameters are supported.
If F0.00 is displayed, the corresponding user-defined parameter is empty. In the user-defined
parameter mode, the displayed parameters are defined by FE-00 to FE-31, and the sequence is
consistent with that in group FE. The parameters are skipped if the displayed value is F0.00.