Inovance MD800 Series Function Guide

Parameter Group
-274-
Default:
0
Change:
At once
Value Range:
0 to 2
Description
2.8 F7: Operating Panel and Display
F7-00
IGBT module indicator testing
Address:
63232
Min.:
0
Unit:
-
Max.: 2 Data type: UInt16
Default:
0
Change:
At once
Value Range:
0 to 2
Description
IGBT module indicator testing
F7-01
MF.K key function
Address:
63233
Min.:
0
Unit:
-
Max.: 4 Data type: UInt16
Default:
0
Change:
At stop
Value Range:
0: MF.K key disabled
1: Switchover between operating panel control and remote command control (terminal I/O control or
communication control)
2: Switchover between forward and reverse running
3: Forward jog
4: Reverse jog
Description
The MF.K key is a multi-functional key. This parameter is used to set the function of the MF.K key.
0: MF.K key disabled
The MF.K key does not work.
1: Switchover between operating panel control and remote control (terminal I/O control or
communication control)
When F0-02 is set to 0 (operating panel), the MF.K key does not work. When F0-02 is set to 1
(terminal), the MF.K key is used for switchover between terminal I/O control and operating panel
control. When F0-02 is set to 2 (communication), the MF.K key is used for switchover between the
communication control and operating panel control.
2: Switchover between forward and reverse running
The MF.K key is used for changing the direction of the frequency reference. This function is valid only
when the command source is set to operating panel control.

Inovance MD800 Series Specifications

General

Brand	Inovance
Model	MD800 Series
Category	DC Drives
Language	English