Inovance MD800 Series - Software Tools; LED Operating Panel; Description of the Operating Panel

Software Tools
-411-
3 Software Tools
3.1 LED Operating Panel
3.1.1 Description of the Operating Panel
The LED operating panel displays the running status and allows you to set parameters and view fault
information. The following figure shows the operating panel.
Figure 3-1 Operating panel
Keys
Table 3–1 Keys
Key Name
Function
Programming
Returns to the previous page.
Enters Level I menu.
Enter
Goes to the next page.
Confirms the mode, parameter, and value.
Axis switchover key Switches between multiple axes. The power supply
unit is selected by default.
Increment
Changes (Increases) the parameter number and value.
Decrement
Changes (Decreases) the parameter number and
value.
Shift Shifts to the right to select parameters to display in
cycle.
Shifts the bit to modify to the right when setting the
parameter number or value.
Multifunction Switches among selected functions according to the
setting of F7-01.
Run
Runs the AC drive when the operating panel control
mode is used.
Stop/Fault reset Stops the AC drive when the AC drive is running.
Resets to clear the fault when a fault is reported.