Inovance MD800 Series - Input;Output Voltage;Current Abnormalities

Parameter Group
-134-
Description
This parameter defines the number of AOs currently available.
U4-10
I/O extension card 2 - DI input
Address:
29706
Min.:
0
Unit:
-
Max.: 65535 Data type: UInt16
Default:
0
Change: Unchangeable
Value Range:
0 to 65535
Description
This parameter shows the current hardware DI input state. Bit0 corresponds to DI1, bit1 corresponds
to DI2, and so on.
U4-11
I/O extension card 2 - DO output
Address:
29707
Min.:
0
Unit:
-
Max.: 65535 Data type: UInt16
Default:
0
Change: Unchangeable
Value Range:
0 to 65535
Description
This parameter shows the current hardware DO output state. Bit0 corresponds to DO1, bit1
corresponds to DO2, and so on.
U4-12
I/O extension card 2 - AI1 input (before correction)
Address:
29708
Min.:
–10.000
Unit:
V
Max.: 10.000 Data type: Int
Default:
0.000
Change: Unchangeable
Value Range:
–10.000 V to 10.000 V
Description
This parameter shows the current AI1 input which is not corrected.
U4-13
I/O extension card 2 - AI2 input (before correction)
Address:
29709
Min.:
–10.000
Unit:
V
Max.: 10.000 Data type: Int
Default:
0.000
Change: Unchangeable
Value Range:
–10.000 V to 10.000 V
Description
This parameter shows the current AI2 input which is not corrected.
U4-14
I/O extension card 2 - AI1 input (after correction)
Address:
29710
Min.:
–10.00
Unit:
V
Max.: 10.00 Data type: Int
Default:
0.00
Change: Unchangeable
Value Range:
–10.00 V to 10.00 V