Parameter Group
-221-
Description
Rated motor power indicates the axis output power of the motor working in rated conditions. Select a
motor of proper power rating based on the requirements of the mechanical load, with due
consideration to factors such as motor heating, overload capacity, and starting capacity.
F1-02
Rated motor voltage
Address:
61698
Min.:
1
Unit:
V
Max.: 2000 Data type: UInt16
Default: Model dependent Change:
At stop
Value Range:
1 V to 2000 V
Description
Rated motor voltage indicates the voltage of the motor during normal operation, which usually refers
to the line voltage.
F1-03
Rated motor current
Address:
61699
Min.:
0.1
Unit:
A
Max.: 6553.5 Data type: UInt16
Default: Model dependent Change:
At stop
Value Range:
0.1 A to 6553.5 A
Description
Rated motor current indicates the current of the motor during normal operation, which usually refers
to the line current.
F1-04
Rated motor frequency
Address:
61700
Min.:
01
Unit:
Hz
Max.: 655.35 Data type: UInt16
Default: Model dependent Change:
At stop
Value Range:
0.01 Hz to 655.35 Hz
Description
Rated motor frequency indicates the frequency of the power supply connected to the stator winding
under the rated operation state of the motor.
F1-05
Rated motor speed
Address:
61701
Min.:
1
Unit:
RPM
Max.:
65535
Data type:
UInt16
Default: Model dependent Change:
At stop
Value Range:
1 RPM to 65535 RPM
Description
Rated motor speed indicates the speed of the rotor under the rated operating state, and the unit is
RPM.
F1-06
Asynchronous motor stator resistance
Address:
61702
Min.:
001
Unit:
Ω
To Next Page
Loading...
