Inovance MD800 Series - Page 239

Parameter Group
-238-
0.00 Hz to 655.35 Hz
Description
This parameter defines frequency 2 in the multi-point V/f curve.
F3-06
Multi-point V/f voltage 2
Address:
62214
Min.:
0.0
Unit:
%
Max.: 100.0 Data type: UInt16
Default:
0.0
Change:
At stop
Value Range:
0.0% to 100.0%
Description
This parameter defines voltage 2 in the multi-point V/f curve.
F3-07
Multi-point V/f frequency 3
Address:
62215
Min.:
0.00
Unit:
Hz
Max.: 655.35 Data type: UInt16
Default:
0.00
Change:
At stop
Value Range:
0.00 Hz to 655.35 Hz
Description
This parameter defines frequency 3 in the multi-point V/f curve.
F3-08
Multi-point V/f voltage 3
Address:
62216
Min.:
0.0
Unit:
%
Max.: 100.0 Data type: UInt16
Default:
0.0
Change:
At stop
Value Range:
0.0% to 100.0%
Description
This parameter defines voltage 3 in the multi-point V/f curve.
F3-09
V/f slip compensation gain
Address:
62217
Min.:
0.0
Unit:
%
Max.: 200.0 Data type: UInt16
Default:
0.0
Change:
At once
Value Range:
0.0% to 200.0%
Description
In V/f mode, increasing the output frequency compensates for reduction in the motor speed. A higher
the gain indicates a higher compensation frequency. However, an excessively high gain can incur
overcompensation.
F3-10
V/f overexcitation gain
Address:
62218
Min.:
0
Unit:
-
Max.: 200 Data type: UInt16
Default:
64
Change:
At once
Value Range: