Inovance MD800 Series - Page 56

Parameter Group
-55-
Value Range:
-
Description
Grid voltage Utr upon the 5th fault
FA-09
Three-phase imbalance factor upon the 5th fault
Address:
64009
Min.:
0.00
Unit:
%
Max.: 0.00 Data type: UInt16
Default:
0.00
Change: Unchangeable
Value Range:
-
Description
Three-phase imbalance factor upon the 5th fault
FA-10
DI state upon the 5th fault
Address:
64010
Min.:
0
Unit:
-
Max.: 0 Data type: UInt16
Default:
0
Change: Unchangeable
Value Range:
-
Description
DI state upon the 5th fault
FA-11
DO/RO state upon the 5th fault
Address:
64011
Min.:
0
Unit:
-
Max.: 0 Data type: UInt16
Default:
0
Change: Unchangeable
Value Range:
-
Description
RO state upon the 5th fault
FA-12
Stop command sent from the power supply unit upon the 5th fault
Address:
64012
Min.:
0
Unit:
-
Max.: 65535 Data type: UInt16
Default:
0
Change: Unchangeable
Value Range:
1: Ready to run
2: Coast to stop
3: Stop according to preset mode
Description
Stop command sent from the power supply unit upon the 5th fault
FA-13
Total power-on time (hour) upon the 5th fault
Address:
64013
Min.:
0
Unit:
h
Max.: 0 Data type: UInt16
Default:
0
Change: Unchangeable