Instantel Micromate - Battery Shipping Instructions

Micromate Operator Manual – 721U0201 Revision 6 103
The table below outlines the effect that temperature will have when operating on the internal battery only.
Record
Number of Monitoring Days at
Mode
-40° C (-40° F)
-20° C (-4° F)
25° C (77° F)
40° C (104° F)
Waveform
1
6.3
10
10.3
Histogram
1
6.3
10
10.3
With an external power source connected, the Micromate will operate continuously drawing power directly
from this external power source. As soon as the ambient temperature is between 0° C and 45° C (32° F and
113° F) the Micromate will automatically start charging the internal battery.
12.3. Battery Shipping Instructions
Prior to shipping the unit to Instantel or an Authorized Service and Calibration Facility, the battery
must be disconnected. This can be done by pressing and holding the power button for five seconds
and confirming that you do want to disconnect the battery. It can also be done through the
maintenance menu. DO NOT OPEN THE UNIT. Refer to section 11.5.5 Disconnect Batteries for
additional information.