Instantel Micromate - Micromate Sensor Check Feature

Micromate Operator Manual – 721U0201 Revision 6 123
Microphone ISEE Amplitude verses Frequency Response
15.1.3. Micromate Sensor Check Feature
The Sensor Check feature on Instantel vibration monitors is to help ensure that the sensors have
been connected and installed correctly. If a geophone sensor was not level or was upside down,
the monitor would indicate a failed sensor check on one or more channels. The sensor check is
NOT a calibration check and cannot replace the annual calibration process as it does not compare
the measured result against an external traceable reference.