82 Micromate Operator Manual – 721U0201 Revision 6
Select Operator Menu List or Operator Names
Within the list of operator names the asterisk (*) is used to indicate the current name that will be
included with the recorded events when the Micromate is placed into monitor mode.
11.3.1. Set Current Operator
To select a different name, navigate to the desired entry and press the check mark key or double
tap on the desired name. This will display the options to select this name as the current name or to
rename it. Select as current and the asterisk will be moved to this file name.
Current List of Names Asterisks Moved From Smith to Stewart
11.3.2. Rename Operator
To rename an operator name navigate to the entry to be changed and press the check mark or
double tap on the desired name. Selecting Rename will display the keyboard with the existing
name. Edit the name as required and press the save icon or Enter key.
Select Rename Operator Keyboard with Current Name Enter and Save New Name
To Next Page
Loading...
