142 Micromate Operator Manual – 721U0201 Revision 6
19.7. Micromate Accessory Parts List
Micromate ISEE Base Unit: Base unit with 1000 event memory, USB cable, Blastware
Compliance Module Software, power adaptor, carrying case and electronic version of manual.
Sensors not included. Must be purchased with either a Standard Triaxial Geophone (p/n
721A2901 or 721A2902) or Triaxial Borehole Geophone (p/n 721A2401 or
721A2402).
Note: Please specify the required power adaptor, 110V AC North American or 220V AC
International, at time of order.
Micromate DIN Base Unit: Base unit with 1000 event memory, USB cable, Blastware
Compliance Module Software, power adaptor, carrying case and electronic version of manual.
Sensors not included. Must be purchased with either a Standard Triaxial Geophone (p/n
721A3301 or 721A3302) or Triaxial Borehole Geophone (p/n 721A2401 or
721A2402).
Note: Please specify the required power adaptor, 110V AC North American or 220V AC
International, at time of order.
Micromate ISEE 2 m (6.5 ft) Triaxial Geophone: 2-250 Hz geophone. Comes complete
with a 2 m (6.5 ft) cable and mounting spikes (p/n 1100241).
Note: Must be calibrated to a Micromate base unit (p/n 721A2501).
Micromate ISEE 5 m (16.4 ft) Triaxial Geophone: 2-250 Hz geophone. Comes complete
with a 5 m (16.4 ft) cable and mounting spikes (p/n 1100241).
Note: Must be calibrated to a Micromate base unit (p/n 721A2501).
Micromate DIN 2 m (6.5 ft) Triaxial Geophone: 1-315 Hz geophone. Comes complete
with a 2 m (6.5 ft) cable and mounting spikes (p/n 1100241).
Note: Must be calibrated to a Micromate base unit (p/n 721A2601).
Micromate DIN 5 m (16.4 ft) Triaxial Geophone: 1-315 Hz geophone. Comes complete
with a 5 m (16.4 ft) cable and mounting spikes (p/n 1100241).
Note: Must be calibrated to a Micromate base unit (p/n 721A2601).
Micromate Linear Microphone: Measures air overpressure in a linear scale. Comes
complete with a 2 m (6.5 ft) cable and microphone stand (p/n 720A6001).
Micromate Sound Level Microphone: Class 1 noise microphone. Comes complete with 2 m
(6.5 ft) cable and a microphone stand (p/n 720A6001).
Micromate Boot: Protective rubber boot and plastic cover for the Micromate.
Micromate Geophone Wall Mount Modification: Modifies a Micromate Triaxial
Geophone to a wall mount orientation. Configured by manufacturer only.
Micromate Auxiliary Port: Auxiliary port for the use of a remote alarm or an external
trigger cable. Configured by manufacturer only.
Micromate Extended Memory: Increases the memory in the Micromate monitoring unit
from 15 megabytes to 60 megabytes. The number of events increases from 1,000 to
4,000. Configured by manufacturer only.
Micromate Extended Battery Life: Extends the battery life of a Micromate monitoring unit
from 10 days to up to 15 days. Configured by manufacturer only.
To Next Page
Loading...
