Micromate Operator Manual – 721U0201 Revision 6 143
Micromate 30 m (100 ft) Triaxial Borehole Geophone: 2.5 in (64 mm) borehole
Geophone with 30 m (100 ft) cable. Requires a 3.0 in (77 mm) minimum diameter
borehole for installation. Note: Must be calibrated to a Micromate base unit (p/n
721A2501 or 721A2601).
Micromate 75 m (250 ft) Triaxial Borehole Geophone: 2.5 in (64 mm) borehole
Geophone with 75 m (250 ft) cable. Requires a 3.0 in (77 mm) minimum diameter
borehole for installation. Note: Must be calibrated to a Micromate base unit (p/n
721A2501 or 721A2601).
Micromate 30 m (100 ft) Extension Cable: For use with Micromate geophones and
microphones. Comes complete with connectors.
Micromate 75 m (250 ft) Extension Cable: For use with Micromate geophones and
microphones. Comes complete with connectors.
Micromate Custom Extension Cable Kit: Kit for splicing custom length extension cables for
Micromate microphones or geophones in the field. Comes complete with two 2 m (6.5 ft)
over molded cables. One cable has a male connector and the other a female connector on
one end. The other end of each cable is unterminated.
Micromate USB to RS-232 Cable: Modem cable with 1.8 m (6 ft) cable for connecting a
Micromate monitoring unit to a cellular modem.
Micromate Remote Alarm Controller: Self-contained controller complete with 2 m (6.5
ft) cable and high power auxiliary drive capability for external sirens and other alarms.
Note: Requires the auxiliary port option (p/n 721A0101).
Micromate External Trigger Cable: 2 m (6.5 ft) cable used to remotely trigger a
Micromate monitoring unit. Note: Requires the auxiliary port option (p/n 721A0101).
Micromate Portable Printer: Battery operated printer. Comes with USB cable. Easily
transported, this lightweight printer is great for printing event reports in the field.
Triaxial Geophone Leveling Plate: Comes complete with leveling feet and integrated
spirit level. For use with Micromate, Minimate Pro, Minimate Plus and Minimate Blaster
external geophones.
Triaxial Geophone Wall Mount Kit: Used to mount an Instantel Triaxial Geophone to a
wall or other vertical surface. Package includes aluminum mounting block, bolts and
mounting instructions. For use with Micromate, Minimate Pro, Minimate Plus and
Minimate Blaster external geophones.
Micromate Quick Start Guide: Printed on water-proof and tear-proof paper. Ideal for rental
units, this is a great start up reference for use in the field. Package of 3.
To Next Page
Loading...
Need help?
General
