Micromate Operator Manual – 721U0201 Revision 6 105
13.2. Modems
The Micromate supports the AirLink Raven X, GX400 and LS300 modems and requires a static IP
address. These modems are not available from Instantel and must be purchased through a third
party provider. The modem requires a USB to RS-232 adaptor cable that is available from Instantel
or online (Instantel Part No. 721A1001, Sabrent Part No. CB-FTDI). The software driver included
with the Micromate has been specifically designed to work with this adaptor. No other adaptor
cables are supported by Instantel.
Commercial Cable Package RS-232 to USB Cable Without Packaging
Micromate Connected to Modem
Configure the modem using the software provided by the manufacturer and the Blastware User
Manual. Refer to section 9.3.5 Auto Call Home for additional information.
To Next Page
Loading...
