Micromate Operator Manual – 721U0201 Revision 6 13
National Frequency Analysis Standards: The Micromate supports numerous National
Frequency Analysis Standards, often called Compliance Reports. Use the Blastware
program to select the desired standard for inclusion on the hard copy field reports.
Full PC Compatibility: Archive, print, perform analysis and post process
with the Blastware software module.
Optional Protective Boot: The optional boot provides added protection
as well as increased flexibility for mounting your Micromate unit.
Optional Auxiliary I/O Connector: This factory installed option allows
for the connection and operation of the Instantel Remote Alarm and or External Trigger
Cable.
Optional Remote Alarm: The Remote Alarm allows the Micromate to control two
external devices such as sounder or strobe lights. Requires the optional Auxiliary I/O
connector be installed.
Optional External Trigger Cable: Use the optional external trigger cable connected to the
auxiliary I/O connector (AUX) to trigger the unit at the same time as an event occurs.
Requires the optional auxiliary I/O connector be installed.
Optional GPS: Connect the compatible Magellan® eXplorist 310 Global Positioning
System (GPS), to the Micromate to download and include the vibration source and
sensor location coordinates on event reports or to synchronize the Micromate’s internal
clock with the GPS system.
Optional Sound Level Microphone: Connect the optional sound level microphone to
perform monitoring of noise such as building activities, construction, traffic, and mining
operations.
To Next Page
Loading...
