IP-COM CPE6S - Page 113

Chapter 7 Wireless 105
Parameters description
Name
Description
Security Mode
The WPA and WPA2 options are available for network protection with a RADIUS
server.
−
WPA: It indicates that the wireless network corresponding to the selected
SSID is encrypted using WPA.
−
WPA2: It indicates that the wireless network corresponding to the
selected SSID is encrypted using WPA2.
RADIUS Server
It specifies the IP address of the RADIUS server for client authentication.
RADIUS Port
It specifies the port number of the RADIUS server for client authentication.
RADIUS Password
It specifies the shared password of the RADIUS server.
Encryption Algorithm
It specifies the encryption algorithm corresponding to the selected security
mode. The available options include AES, TKIP, and TKIP&AES.
−
AES: It indicates the Advanced Encryption Standard.
−
TKIP: It indicates the Temporal Key Integrity Protocol.
−
TKIP&AES: It indicates that both TKIP and AES encryption algorithms are
supported. Wireless clients can connect to the wireless network
corresponding to the selected SSID using TKIP or AES.
Key Update Interval
It specifies the automatic update interval of a WPA key for data encryption. A
shorter interval results in higher data security.
The value 0 indicates that a WAP key is not updated.