Chapter 4 Quick setup 26
Parameters description
It specifies the wireless network name of this CPE.
It specifies the operating channel of this CPE.
Auto: It indicates that the device automatically adjusts its operating channel
according to the ambient environment.
It specifies the security mode of the wireless network, including: None, WPA-PSK,
WPA2-PSK, and Mixed WPA/WPA2-PSK.
It specifies the encryption method of the wireless network.
−
AES: It indicates the Advanced Encryption Standard.
−
TKIP: It indicates the Temporal Key Integrity Protocol. If TKIP is used, the
maximum wireless throughput of the CPE is limited to 54 Mbps.
−
TKIP&AES: It indicates that both TKIP and AES encryption algorithms are
supported. Wireless clients can connect to the wireless network
corresponding to the selected SSID using TKIP or AES.
It specifies the WiFi password of the wireless network.
4. Click Save, and wait until the CPE reboots automatically to activate the settings.
----End
To Next Page
Loading...