Chapter 4 Quick setup 39
----End
When the LED1, LED2, and LED3 of CPE are blinking, the bridging succeeds. The WiFi name
and password of the CPE are the same as those of the upstream AP.
To access the internet with:
− Wireless devices: Connect the wireless devices, such as a smart phone, to the WiFi
network of the CPE using the WiFi name and password of the upstream AP.
− Wired devices: Connect the wired devices, such as a computer, to the LAN port of the
CPE, or the switch connected to the LAN port of the PoE injector.
To Next Page
Loading...