3─107
Depth Graph Setting
1. Depth Graph Display
OFF
2. Depth Range
50 m
3. Time Range
10 min
4. Depth Unit
METERS
0. EXIT
Displaying Water Depth Graph (Depth Graph Setting)
• Displays a water depth graph using received water depth information.
Procedures 1 Press [RADAR MENU] key twice.
Press [4] key.
Press [4] key.
The Depth Graph Setting Menu will appear.
Detail information about screen display can be
set by changing the settings of the menu items.
[1] Depth Graph Display
• Determine whether to display received water depth
information with a graph.
• The graph is displayed in one of two ATA’s numeric data display areas.
• When the water depth graph is displayed, the sizes of the ATA’s numeric data display areas are
exclusively decreased.
• Depth Graph Display is set to ON/OFF each time the
58
button on the screen on page 2-7 is pressed.
OFF : Does not display a water depth graph.
AREA1 : Displays the water depth graph in numeric data display area 1.
AREA2 : Displays the water depth graph in numeric data display area 2.
To Next Page
Loading...
