JRC JMA-5206 - Page 187

3─118
3
3.10 APPLIED OPERATIONS
y
y y
[1] Depth Contours.
• Sets whether or not the Depth Contours are displayed.
• Each time you press [1] key, the Depth Contours is switched
between ON and OFF.
• ON: Displayed
OFF: Not displayed
[2] Contour Upper limit.
• Sets upper limit of the contours.
• Press [2] key to display the input menu of upper limit.
• Using numerical keys, Sets upper limit.
[3] Contour Lower limit.
• Sets Lower limit of the contours.
• Press [2] key to display the input menu of Lower limit.
• Using numerical keys, Sets lower limit.
Note: Unit for the above mentioned limits defines
on the Sounding Unit menu (C-MAP setting).
Depth Counter
2. Upper
9843
3. Lower
0000
0. EXIT
1. Depth Counter
ON