5─35
ATA Track Setting
1. Track Function
ON
2. Track Color >
3. Track Display >
4. Track Memory Interval
3 sec
5. Clear Track Color
WHITE
6. Clear Track Number
7. Card2 Track Display
0000
0. EXIT
WHITE
5.2.8 Setting ATA Tracks (ATA Track Setting)
Track information on acquired ATA targets can be set.
This radar can acquire target tracks of up to 20 ships.
[I] Turning ON/OFF the target track function (Track Function)
Procedures 1 Press [ATA MENU] key.
2 Press [3] key.
The ATA Track Setting Menu will appear.
3 Press [1] key.
The ATA Track function is switched between
ON and OFF.
ON: Sets the ATA Track function to ON.
OFF: Sets the ATA Track function to OFF.
* When this function turn off, all target track functions to OFF(Including track memory), If so, checking
cannot be done later.
To Next Page
Loading...
Need help?
General
