JMA-9100 Instruction Manual > 3.BASIC OPERATION > 3.6 DISPLAY USER MAP
3ļ¼57
3
(Example)
3.6.3.5 Correcting the mark or vertex of a line (Insert/Move Vertex)
With regard to the created user map, a mark or line is corrected.
Procedures
1) Open the Edit User Map menu by performing the following menu
operation.
āć
The Edit User Map menu will appear.
2) Left-click the button.
The user map insertion/correction mode is selected.
is displayed in the cursor mode located at the upper right of the display.
3) Put the cursor on the mark or vertex of a line, and left-click.
When the mark or vertex of a line to be corrected is selected, the cursor mark will
appear.
4) Move the cursor mark to the destination, and left-click.
The selected mark or vertex of the line is moved to the destination.
To correct another mark or vertex of a line, repeat procedures 3 and 4.
5) When finished with the correction of all items, left-click the
button.
The side line into which
a vertex is inserted
Inserted vertex
U.Map
2. Edit User Map
5. Insert /Move Vertex
Insert/Move
0.Exit
To Next Page
Loading...
Need help?
General
