JRC JMA-9110-6XA User Manual

JMA-9100 Instruction Manual > 3.BASIC OPERATION > 3.7 USE ROUTE FUNCTION
3－89
3
Procedures
1) Insert a flash memory card into the card slot.
2) Open the File Operations menu by performing the menu
operation below.
→
3) Left-click the button.
Contents of the specified memory card (file list) will be displayed.
4) Left-click the button for the desired file name.
Confirmation Window will appear.
5) Left-click the button.
The route data with the specified file name will be loaded.
3.7.8.4 Erasing route data (Erase)
An unnecessary route data file saved on a flash memory card is erased.
Flash memory card (option) is necessary.
Procedures
1) Insert a flash memory card into the card slot.
2) Open the File Operations menu by performing the menu
operation below.
→
NOTE:
Once route data files that have been saved on a flash
memory card is erased, the erased data cannot be
resaved. Note that important files should not be erased.
Route
4. File Operation
2. Load
1. Yes
Route
4. File Operation

JRC JMA-9110-6XA Specifications

General

Brand	JRC
Model	JMA-9110-6XA
Category	Marine Radar
Language	English