JRC JMA-9110-6XA - Page 555

JMA-9100 Instruction Manual > C.Menu Index > C.1 Main
C－3
C
││├3. ROT
││├4. RSA
││├5. Time Zone
││├6. Date/Time
├ 7. Sub Menu
│├1. Display Color Setting - - - - - - - - - - - - - - - - - - - -
section 3.8.5.1 on page 3-99
││├1. Day/Night - - - - - - - - - - - - - - - - - - - - - - section 3.8.5.2 on page 3-100
││├2. Outer PPI
││├3. Inner PPI
││├4. Character
││├5. RADAR Video
││├6. RADAR Trails(Time)
││├8. Target Symbol
││├9. Next
││├1. Cursor
││├2. Range Rings
││├3. EBL/VRM/PI
││└4. Own Symbol/HL/Vector
│├2. Brilliance Setting- - - - - - - - - - - - - - - - - - - - - - -
section 3.8.5.3 on page 3-100
││├1. RADAR Video - - - - - - - - - - - - - - - - - - - - section 3.8.5.4 on page 3-101
││├2. RADAR Trails
││├3. Target Symbol - - - - - - - - - - - - - - - - - - - -
section 3.8.5.5 on page 3-102
││├4. Range Rings
││├5. EBL/VRM/PI
││├6. Character
││├7. Own Symbol/HL/Vector
││└8. Keyboard
│├3. User Setting
││├1. Load User Setting - - - - - - - - - - - - - - - - - -
section 3.10.1 on page 3-118
││├2. Save User Setting - - - - - - - - - - - - - - - - - - section 3.10.2 on page 3-119
││└3. Delete User Setting - - - - - - - - - - - - - - - - - section 3.10.3 on page 3-119
│├4. Option Key Setting
││├1. Option1 - - - - - - - - - - - - - - - - - - - - - - - -
section 3.8.7 on page 3-103
││└2. Option2 - - - - - - - - - - - - - - - - - - - - - - - -section 3.8.7 on page 3-103
│├5. Buzzer Volume - - - - - - - - - - - - - - - - - - - - - - - -section 3.8.6 on page 3-102
││├1. Key ACK
││├2. OPE Miss
││├3. CPA/TCPA Alarm
││├4. New Target Alarm
││├5. Lost Alarm
││├6. Navigation Alarm
││├7. System Alarm
││└8. Inter Switch
│├6. Date/Time Setting - - - - - - - - - - - - - - - - - - - - - - -
section 7.2.7 on page 7-20
││├1. UTC/LMT
││├2. LMT Date
││├3. LMT Time
││├4. Time Zone
││├5. Display Style
││└6. Synchronize with GPS
│├7. Screen Capture Setting
││├1. Select Item
│││├1. Graphic
│││├2. RADAR Video
│││├3. RADAR Trails
│││└4. Map
││├2. Select Card Slot
││├3. File Erase
││├4. AUTO Capture Interval
││└5. AUTO File Erase
│├9. EBL/Cursor Setting - - - - - - - - - - - - - - - - - - - - - - -
section 4.1.3 on page 4-3
││├1. EBL1 Bearing Fix
││├2. EBL2 Bearing Fix
││└3. Cursor Setting - - - - - - - - - - - - - - - - - - - - -
section 4.1.3.3 on page 4-5
│││├1. EBL/VRM Control Cursor
│││├2. Cursor Length
│││└4. Cursor Pattern
├ 8. Plot Setting
│└6. AUTO Backup - - - - - - - - - - - - - - - - - - - - - - - - -
section 3.8.9 on page 3-110
├ 9. Test Menu - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - section 8.3.1 on page 8-7