Table 5: Supported QFX and EX Series Switches Configurations (continued)
Junos Fusion
Virtual Chassis
Fabric
QFX Virtual
ChassisQFX3000–MQFX3000-GStandalonePlatform Element
13.2X51-D2513.2X51-D25Initial software
release
ringTopology
101Number of
members or nodes
Number of
QFX5100 spine
devices
QFX3600
13.2X51-D2013.2X50-D1512.2X50-D1012.2X50-D2012.2X50-D20Initial software
release
spine and leafringclosclosTopology
18 out of 20
leaf mode only
10161281Number of
members or nodes
Min: 2 out of 20
Max: 4 out of 20
NANANumber of
QFX5100 spine
devices
QFX5100-24Q
14.1X53-D1613.2X51-D2013.2X51-D2014.1X53-D1514.1X53-D1513.2X51-D10Initial software
release
spine and leafspine and leafringclosclosTopology
64 leaf mode only20 spine or leaf
NOTE: Use as a
spine with
EX4300,
QFX5100-24Q,
QFX5100-48T,
QFX5100-48S, or
QFX3600.
1016
NOTE:
Supported
both as an
interconnect
device and a
node device.
1281Number of
members or nodes
Min: 2 out of 20
Max: 4 out of 20
Number of
QFX5100 spine
devices
QFX5100-24Q-AA
15Copyright © 2016, Juniper Networks, Inc.
Chapter 1: System Overview
To Next Page
Loading...
