Table 5: Supported QFX and EX Series Switches Configurations (continued)
Junos Fusion
Virtual Chassis
Fabric
QFX Virtual
ChassisQFX3000–MQFX3000-GStandalonePlatform Element
14.1X53-D26Initial software
release
QFX5100-48S
14.1X53-D1613.2X51-D2013.2X51-D2013.2X52-D1013.2X52-D1013.2X51-D10Initial software
release
spine and leafspine and leafringclosclosTopology
64 satellite
devices
20 spine or leaf
NOTE: Use as a
spine with
EX4300. Use as
leaf with
QFX5100-24Q.
10161281Number of
members or nodes
Min: 2 out of 20
Max: 4 out of 20
Number of
QFX5100 spine
devices
QFX5100-48T
14.1X53-D1613.2X51-D2513.2X51-D2514.1X53-D1514.1X53-D1513.2X51-D25Initial software
release
spine and leafspine and leafringclosclosTopology
64 satellite
devices
20 leaf mode only10161281Number of
members or nodes
Min: 2 out of 20
Max: 4 out of 20
Number of
QFX5100 spine
devices
QFX5100-96S
14.1X53-D1613.2X51-D2513.2X51-D2013.2X51-D20Initial software
release
spine and leafspine and leafringTopology
64 satellite
devices
20 spine or leaf
NOTE: Use as a
spine with
EX4300. Use as a
leaf with
QFX5100-24Q.
Increased from
4 members to
10 in
13.2X51-D25
1Number of
members or nodes
Copyright © 2016, Juniper Networks, Inc.16
QFX5100 Switch Hardware Guide
To Next Page
Loading...
