KEMPOWER Power Unit - Satellite Version 1 with Two CCS Vehicle Connectors

11.2. Satellite Version 1 with two CCS vehicle connectors
NOTE
Grounding of the Ethernet shield at one end only, charging power unit or Satellite.
Figure 63. Satellite Version 1 with two combined charging system (CCS) vehicle connectors
1 Configuration tag (left vehicle
connector)
7 Charging cable (right)
2 Configuration tag (right vehicle
connector)
8 Charging cable (left)
3 CT line signal wires 9 Communication cable
4 Vehicle connector signal wires
(right)
10 DC output power cables + PE (left)
5 Voltage measurement wires 11 DC output power cables + PE
(right)
6 Vehicle connector signal wires
(left)
12 Control cable (CT line)
CHARGING EQUIPMENT FOR ELECTRIC VEHICLES INSTALLATION MANUAL
CONFIDENTIAL – CERTIFIED PARTNERS 140 REV 2.40 EN 04-2024