Figure 41. Terminal blocks in the charging power unit (max. DC output 50 mm
2
)
1 Control cable signal wires 6 AC supply power cable phase 1 (L1)
2 Control cable ground wires (0 V) 7 AC supply power cable phase 2 (L2)
3 Control cable auxiliary power wires
(+24 V)
8 AC supply power cable phase 3 (L3)
4 DC output power cables (red +,
black -)
9 Fasteners for Ethernet terminal
blocks
5 Protective earth (PE) 10 Neutral (N)
CHARGING EQUIPMENT FOR ELECTRIC VEHICLES INSTALLATION MANUAL
CONFIDENTIAL – CERTIFIED PARTNERS 86 REV 2.40 EN 04-2024
To Next Page
Loading...
