DIAGNOSTICS Using the Diagnostics
10DEC05
DG4825-1
Page
19 of 180
[Actuation Log]
Important
For the procedure, see Checking the Actuation Logs.
Allows you to check:
• “SCAN CYCLES” - This value cannot be reset
• “BATCH ERASE CYCLES” - The number of times that
the “Batch Erase” function was used
• “TOTAL POWER-ON HOURS”
• “LASER DIODE SCAN CYCLES”
• “LASER HOURS (estimated)”
• “LASER HOURS LAST CLEARED”
[Export Log Files]
Important
For the procedure, see Storing the Error Logs on a Disk.
Records onto a FLOPPY DISKETTE:
• “Actuation Logs”
• error logs
• parameters of the SLOW SCAN
BUTTON Description
To Next Page
Loading...
Need help?
General
