KSB PumpDrive 2 - Page 161

10 Parameter List PumpDrive 2
161 of
212
Parameter Description Help text Possible settings Unit Factory setting
3-8-6-8 Digital Input 8 Function Configurable function of digital input8 of I/
O extension board
▪ No Function
▪ System Start
▪ Potentiometer Auto +
▪ Potentiometer Auto -
▪ Control Point
▪ Alternative Setpoint/Control Value
Active
▪ Potentiometer Manual +
▪ Potentiometer Manual -
▪ Control Digital Bit 0
▪ Control Digital Bit 1
▪ Control Digital Bit 2
▪ Dry Running Protection
▪ Reset Messages
▪ Control AOUT Bit 0
▪ Control AOUT Bit 1
▪ External Message
▪ Start Functional Check Run
▪ Start Pump Changeover
No Function
3-8-7 Analog Output 1
3-8-7-1 Assignment 1 Analog
Output 1
Selectable assignment 1 of analog output 1 ▪ OFF
▪ Setpoint
▪ Actual Value
▪ Motor Speed
▪ Motor Power
▪ Motor Current
▪ Motor Voltage
▪ Output Frequency
▪ DC Link Voltage
Motor Speed