11 kW: 4 x 6 mm² + PTC 01630613 0,6
15 kW: 4 x 10 mm² + PTC 47117506 0,8
22 kW: 4 x 16 mm² + PTC 01466746 1
30 kW: 4 x 25 mm² + PTC 47117509 1,7
37 kW: 4 x 35 mm² + PTC 01641614 2
45 kW: 4 x 50 mm² + PTC 01641615 2,4
55 kW: 4 x 70 mm² + PTC 01641616 3,3
12.2.4 Adapter for wall and cabinet mounting
The adapter can be used for wall mounting as well as for cabinet mounting and is
included in the KSB scope of supply as standard.
Table126: Adapter for wall and cabinet mounting
Description Design Mat. No. [kg]
Set of mounting
elements for size A
The adapter can be used for wall
mounting as well as for cabinet
mounting and is included as standard
in the KSB scope of supply for wall-
and cabinet-mounted models.
01496581 0,2
Set of mounting
elements for size B
01579783 0,3
Set of mounting
elements for size C
01496582 0,5
12.2.5 M12 module
Table127: Accessories: M12 module
Description Design Mat. No. [kg]
M12 module accessory kit
Multiple pump configuration for up
to 6pumps for PumpDrive2 and up
to 2pumps for PumpDrive2Eco
PumpMeter connection via Modbus
01496566 0,3
Blanking plate for closing an open
slot
01496567 0,1
M12 protective cap for the M12
module
01125084 0,05
Pre-configured bus cable for dual
and multiple pump configuration
For looping of the KSB device bus
(CAN) from frequency inverter to
frequency inverter via M12 module
Shielded
Colour: light purple, M12 connector:
angled, M12 connector: angled
Length 1m 01533747 0,1
Length 2m 01533748 0,2
Length 3m 01533749 0,3
Length 5m 01651182 0,3
Length 10m 01651183 0,6
Length 20m 01651184 1,2