11 Trouble-shooting
195 of 212
PumpDrive 2
11.4 Information messages
Table119: Information messages
Message
number
Message Description Behaviour
I100 Pump maintenance/
service interval
Service interval set for pump expired Self-acknowledging
I101 Drive disabled ▪ The motor is disabled while AMA is being
carried out.
▪ If the Overcurrent alert is output that
causes the drive to be stopped, the drive
remains disabled as long as this event is
active.
▪ In the event of a stop via the DI-EN digital
input, the drive is not stopped by the stop
ramp, but coasts to a standstill. The
amount of time this process takes
depends on the mass moment of inertia
of the system. The drive remains disabled
during coasting.
Self-acknowledging
I102 Pipe flushing mode active Performing the pipe flushing function Self-acknowledging
To Next Page
Loading...
