KSB PumpDrive 2 - Page 201

12 Purchase Order Specifications
201 of 212
PumpDrive 2
Description Design Mat. No. [kg]
Modbus RTU field bus module
For connecting the frequency
inverter to Modbus networks
16)
Frequency inverters used in single-
pump and multiple pump
configurations can be monitored
and controlled using just one
Modbus module.
Suitable for sizes A, B, C,
D and E
01551016 0,3
LON field bus module
For connecting PumpDrive 2 to LON
networks
An LON module is required for
monitoring and open-loop or closed-
loop control purposes for each
frequency inverter in single-pump or
multiple pump configurations.
Suitable for sizes A, B, C,
D and E
01551015 0,3
Profibus field bus module
For connecting PumpDrive 2 to
Profibus networks
A Profibus module is required for
monitoring and open-loop or closed-
loop control purposes for each
frequency inverter in single-pump or
multiple pump configurations.
Suitable for sizes A, B, C,
D and E
01551037 0,3
M12 connector for self-assembly
Suitable for Modbus and Profibus
Angled connector, B-coded, 5 poles,
screw terminal connection, with
shield ring, shieldable
Connection cross-
section: max. 0.75mm²
(max. AWG20)
Cable passage: 4-6mm,
5-8mm, 6-8mm, 6.5-
8.5mm
Enclosure: IP67
01651264 0,1
M12 socket for self-assembly
Suitable for Modbus and Profibus
Angled socket, B-coded, 5 poles,
screw terminal connection, with
shield ring, shieldable
Connection cross-
section: max. 0.75mm²
(max. AWG20)
Cable passage: 4-6mm,
5-8mm, 6-8mm, 6.5-
8.5mm
Enclosure: IP67
01651298 0,1
Bus cable, CAN and Modbus
Cut to length for self-assembly,
shielded, twisted pair, cable 2 × 2 ×
0.22mm²
Length 1 m 01111184 0,2
Length 5 m 01304511 0,4
Length 10 m 01304512 0,7
Length 20 m 01304513 1,4
16) PumpDrive 2 Eco has just one slot into which the M12 module or the ModbusRTU module can be inserted.