KSB PumpDrive 2 - Page 204

12 Purchase Order Specifications
204 of 212
PumpDrive 2
Table130: Accessories: Temperature measurement
Description Design Mat. No. [kg]
Resistance thermometer Pre-configured for measured medium
temperature of 0to150°CTR10-C sensor
well, T24.10 transmitter and TW35-4
thermowell for measured medium
temperatures of -200 °C to 600°C
Sensor tolerance: ClassB to DINEN60751,
2-wire output 4-20mA, Measuring range
with PT100 element 1x3-wire, Supply
voltage: 10 - 36V DC, G1/2B process
connection made from CrNi steel 1.4571,
Total length with stem: 255mm,
Thermometer installation length: 110mm,
Connecting head type BSZ, aluminium,
IP65 enclosure
01149295 0,8
Table131: Accessories: Flow measurement
Description Design Mat. No. [kg]
Flow sensor 3…300 cm/s
For filter loss compensation control, cost-
effective flow control,
Measuring range 3 - 300cm/s, process
connection with internal thread, output 4-
20mA
01150960 0,3
Plug connector with cable
for Effector300 transmitter
Cable socket M12/angled/4-core/5m/PUR,
Compatible with cable drag chains, Free of
halogen and silicone
01473177 0.2
Table132: Accessories: Connection cable
Description Design Mat. No. [kg]
Connection cable for sensors Cable 2 x 2 x 0.5 mm², shielded, for
connecting sensors to PumpDrive, price per
metre
01083890 0,1
Connection cable for
redundant sensor
connection
5-core cable, halogen-free, type Ölflex
110CH, length approx. 1 m, Pre-
configured, for forwarding a sensor signal
to the second PumpDrive for redundant
operation (e.g. DPM)
01131430 0,3