Copying Functions
ADVANCED OPERATION GUIDE 1-19
8
Press S or T to select the
required Original Placement and
press [Enter].
A Completed message displays
and the Function screen returns.
9
Press the right [Select] key. The message display returns to the Copy
Basic screen.
Using the Document Processor with Combine Mode
1
Load the originals into the
Document Processor.
2
Press [Copy]. The Copy Basic screen displays.
3
Make selections for the Combine Mode as required - for more information,
refer to page 1-17.
4
Press [Start]. The originals are
scanned automatically and
copying will begin.
Using the Platen with Combine Mode
1
Position the first original.
Orig. Placement:
Cancel
*
Top Edge to Rear
Top Edge to Left
To Next Page
Loading...
