Copying Functions
1-20 ADVANCED OPERATION GUIDE
2
Press [Copy]. The Copy Basic screen displays.
3
Make selections for the Combine Mode as required - for more information,
refer to page 1-17
4
Press [Start]. The original is
scanned.
5
When scanning has finished a
message displays: Set original
and press Start key.
Position the next original on the
Platen ready for scanning and
press [Start]. The next original is
scanned.
6
Repeat step 5 until all the originals have been scanned.
7
When all the originals have been
scanned, press the right [Select]
key. An Accepted message
displays and copying
commences.
Job No.:
*
Scanning.
Cancel
Job No. 123:
*
Set original
Page:
Cancel
Job No.:
1
123
and press Start key.
End Scan
*
Set original
Page:
Cancel
Job No.:
8
123
and press Start key.
End Scan
To Next Page
Loading...
