Leica C - Changing the Settings Assigned to the Control Ring

Taking pictures
Changing the settings assigned to the
control ring
- 118 -
■
Recording modes:
For changing the settings assigned to the control ring.
Select [Control Ring Set] from the [Setup] menu, and then
press [MENU/SET] (→52)
Use the cursor buttons to select the setting to change, and
then press [MENU/SET]
●
Settings that can be assigned
• [Step Zoom] (→74)
• [Exposure Comp.] (→90)
• [Aspect Ratio] (→128)
• [Sensitivity] (→130)
• [White Balance] (→131)
●
To return to the default setting, select [Default Control] from [Control Ring Set].
●
The changed setting may not work depending on the recording mode.
●
The control ring cannot be used to for manual focusing if its settings have been
changed.
●
For [Snapshot Mode], the setting is fixed to [Step Zoom].