Leica C - [Output]; [HDTV Link]; [3 D Playback]

Basics
Using the [Setup] menu
- 62 -
• For the setting procedures of the menu. (→52)
[Output]
Changes the settings to be used when the camera is connected to a TV or an other
device.
●
[Video Out] (With camera models 18 484/-487/-488/-491)
■
Settings
[NTSC] Video output is set to NTSC system.
[PAL] Video output is set to PAL system.
●
[TV Aspect] (This setting is available when an AV cable is connected.)
■
Settings: /
[HDTV Link]
Enables automatic linking with other HDTV Link-compatible devices, and operability with
a HDTV remote control when connecting via an HDMI micro cable (→203).
■
Settings
[ON]
Operations may be performed via the remote control of the HDTV Link-compatible
device.
• Not all operations will be available.
• Operability of the camera’s own buttons will be limited.
[OFF] Operations must be performed via the camera’s own buttons.
[3D Playback]
Sets how a 3D still picture is output.
■
Settings: [3D] / [2D]
●
If you want to play back a picture in 2D (conventional picture) on a 3D television, set
to [2D].
●
This item of the menu functions when an HDMI micro cable is connected.
●
For the procedure for playing back a 3D still picture. (→205)