Leica C - Page 223

Wi-Fi/NFC
Operating the camera using a smartphone
- 187 -
Select [Via Network] or [Direct] to connect (→190)
(On your smartphone)
●
When connecting with [Via Network]
Set the Wi-Fi function to “ON”
Select a wireless access point, and set
Start “Leica C Image Shuttle”
*
(→174)
●
When connecting with [Wi-Fi Direct] or [WPS Connection] in [Direct]
Start “Leica C Image Shuttle”
*
(→174)
●
When connecting with [Manual Connection] in [Direct]
Set the Wi-Fi function to “ON”
Select the SSID that matches the one displayed on the screen of the camera,
and then enter the password
Start “Leica C Image Shuttle”
*
(→174)
*
A window indicating that the smartphone is connecting to the camera is displayed. Press the
“Back” button on Android devices / Select “Close” on iOS devices
Select the device you wish to connect to
• When the connection is established, the screen is displayed. To change the send
setting: Press the [DISP] button (→199)
Take still pictures
• The still pictures are sent automatically after taking them.
• To change the setting or disconnect: Press the [WIFI] button
You cannot change the settings while sending still pictures. Wait until sending is
complete.