Maintenance 7-3
D-H023.0906EN
innovators in agriculture
Maintenance Tasks Frequencies
Hours Day Week Month Year Operating
Hours
Milkings
Examine the quantity of Astri-L
(page 7-43)
1
Examine the compressor and air dryer
1
Examine the robot performance list
(page 7-50)
1
Measure the weight of the feed portion
(page 7-17)
1
Measure concentration of Astri-L
(page 8-12)
1
Test the spray beam of the teat
disinfection nozzle (page 8-11)
1
Examine the teat cup liners (page 7-28)
1
Replace the teat cup liners (page 7-29)
8-10
silicon
10,000
rubber
2,500
Measure the temperature of the hot
cleaning water (page 8-12)
1
Examine the cup cords (page 7-20)
1
Examine the compressor for leaks
3
2,000
Clean the exterior of the vacuum pump
6
Examine the vacuum pump oil level
(page 7-46)
2,000
Examine the feed funnel (page 7-14)
1
Test the save-life switch (page 8-14)
1
Cut the tails of the cows approximately 3
cm (1.2 in) below the tail bone
3
Shave the udders.
Refer to udder and tail shaving
(page 6-4)
3
Test the earthing of the milking robot
(page 8-16)
1