4-2 Description and Operation
D-H023.0906EN
innovators in agriculture
The optional segregation gate (not shown) can be installed at the exit
side of the box. Controlled by the milking robot and the T4C and X-Link
software, the cow is sent in a specified direction when the cow leaves
the box.
The optional Jersey set (not shown) is an adaptation of the box to
position smaller cows better. Because it is a fixed option, it applies to all
cows that use the adapted milking robot.
Figure 3. Box overview
KEY:
1. Movement inductor - 2. Box frame - 3. Gates, with side gates
To Next Page
Loading...
