Lexmark CX310dn - Page 85

Actions Yes No
Step 3
Open the front cover, and check the power cable (A) on the left side of
the fuser.
Remove the right cover assembly. See “Right cover assembly removal”
on page 223.
Check the thermistor cables and connections (B) on the right side of the
fuser.
Are the cables or connectors damaged?
Repair the cables. If the
cables cannot be
repaired, then replace
the fuser. See “Fuser
assembly removal” on
page 257.
Go to step 5.
7527
Diagnostic information
85