Link 2600 - Figure 73: Spring Base with 5100-11 Encoder Dimensions

Doc #: L-2600-1023 Page 82 Rev. 02
2.0” (50.8)
1.0”
(25.4)
7.5” (190.5)
9.5” (241.3)
5.5”
(139.7)
6.5”
(165.1)
3/8” clearance
holes for
5/16-18 bolts
to mount spring
base to press
(4 places)
Spring Base Bottom Plate
Values in
parentheses
are in
millimeters
Spring
Base with
5100-11
Encoder
3.5”
(88.9)
4.9”
(124.5)
1.25” (31.8)
7.6” (193)
3” (76)
Clearance
for
connector
Shown at 50%
spring base
compression
Circular
connector
ZERO
ZERO
4.3”
(109.2)
4.5” (114.3)
4.65” (118.1)
4.0”
(102)
3.25”
(82.6)
3.5”
(88.9)
3.75”
(95.3)
9.85”
(250.2)
100% Compressed
50% Compressed
0% Compressed
100% Compressed
50% Compressed
0% Compressed
Max Opening
102°
Mount resolver
using narrow
set of holes
Figure 73: Spring Base with 5100-11 Encoder Dimensions