3-62
[4] CHECKING OUTRIGGER OPERATION
Be sure to refer to "Operation 2.14 Outrigger Setting Operation" and "Operation 2.24 Outrigger
Stowing Operation", and strictly observe the methods described and cautions given when
checking operations of the outriggers.
1. Verify that the outrigger inner box extends smoothly when the
outrigger extension switch is pushed down to the "OUT" position.
Also, verify that the inner box retracts smoothly when the
outrigger extension switch is pushed down to the "IN" position.
When doing the above, check for any abnormal noise
generated by part of the outrigger.
Operate the other switches likewise and check the operations.
If there is any abnormality, repair.
2. Verify that the outrigger lowers smoothly when the outrigger
setting switch is pushed down to the "OUT" position. Also, verify
that the inner box rises smoothly when the outrigger setting
switch is pushed down to the "IN" position.
When doing the above, check for any abnormal noise generated
by part of the outrigger.
Operate the other switches likewise and check the operations.
If there is any abnormality, repair.
To Next Page
Loading...
