Maeda MC-305C-2 - Page 5

0-3
ITEM
Page
3. HANDLING RUBBER TRACKS 3-102
3.1 GOOD USE 3-102
3.2 WARRANTY 3-102
3.3 DOS AND DON’TS 3-103
3.4 CAUTIONS IN USING RUBBER TRACKS 3-104
4. HANDLING WIRE ROPES 3-106
4.1 BENCH MARK FOR REPLACING WIRE ROPES 3-106
4.2 What TO DO WITH TWISTED WINCH WIRE ROPE 3-107
5. TRANSPORTATION 3-108
5.1 LOADING/UNLOADING 3-108
5.2 HOISTING MACHINE 3-109
5.3 CAUTIONS IN LOADING MACHINE 3-110
5.4 CAUTIONS DURING TRANSPORTATION 3-110
6. HANDLING IN COLD WEATHER 3-111
6.1 PREPARING FOR LOW TEMPERATURE 3-111
7. LONG-TERM STORAGE 3-113
7.1 BEFORE STORING MACHINE 3-113
7.2 DURING STORAGE 3-113
7.3 AFTER STORAGE 3-113
8. HANDLING BATTERY 3-114
8.1 CAUTIONS IN HANDLING BATTERY 3-114
8.2 REMOVING/INSTALLING BATTERY 3-115
8.3 CAUTIONS IN CHARGING BATTERY 3-116
8.4 STARTING ENGINE WITH BOOSTER CABLE 3-117
9. TROUBLESHOOTING 3-119
9.1 ELECTRICAL COMPONENTS 3-119
9.2 MACHINE BODY 3-120
9.3 ENGINE 3-121
INSPECTION AND MAINTENANCE
4- 1
1. PRECAUTIONS FOR MAINTENANCE 4- 2
2. BASIC MAINTENANCE 4- 4
3. LEGAL INSPECTION 4- 6
4. CONSUMABLES 4- 6
5. LUBRICATING OIL 4- 7
5.1 USE OF LUBRICATING OIL ACCORDING TO TEMPERATURES 4- 7
6. ACCESSORY TOOLS AND STANDARD TIGHTENING TORQUE 4- 8
6.1 ACCESSORY TOOLS 4- 8
6.2 STANDARD TIGHTENING TORQUE LIST 4- 8
7. INSPECTION AND MAINTENANCE LIST 4-10
8. MAINTENANCE PROCEDURES 4-12
8.1 INITIAL 10 HOUR MAINTENANCE 4-12
8.2 INITIAL 50 HOUR MAINTENANCE 4-12
8.3 INITIAL 250 HOUR MAINTENANCE 4-12
8.4 CHECKING BEFORE OPERATION 4-12
8.5 IRREGULAR MAINTENANCE 4-13
8.6 MAINTENANCE EVERY 30 HOURS 4-22