Grove Published 3-22-2021, Control # 702-02 4-127
GRT8120 OPERATOR MANUAL OPERATING PROCEDURES
that the boom is now at the wall limitation, so
alarms will sound. The boom can now be moved
away from the wall to cease the alarm.
10. Multiple Virtual Walls are now defined and enabled.
Virtual Walls Limitation Disable Procedure
To disable the active Virtual Walls Limitation, the following
steps can be used:
1. Using the Jog Dial (5, Figure 4-63) go to the Working
Range Limiter (WRL) Group Menu (1), (Figure 4-108).
Then choose the Virtual Walls Limitation Menu (6),
(Figure 4-108).
2. Use the Right Arrow (4), (Figure 4-62) key and to
highlight the Virtual Wall Number (1), (Figure 4-113).
3. If the wall number shown is not the correct number for
wall to be disabled, use an OK Button (5, Figure 4-62) to
allow you to modify the value. (In other words, be sure
that the number of walls you set matches the Virtual
Walls Number (1), (Figure 4-113).
4. Use the Up/Down Arrows (4, Figure 4-62) to alter the
Virtual Walls number to the desired value. Use an OK
Button (5, Figure 4-62) to finish entering the value.
5. Use the Left Arrow and/or Right Arrow (4, Figure 4-62)
keys or the Jog Dial (5, Figure 4-63) to highlight the
Enable/Disable Switch Symbol (4, Figure 4-113).
6. Use an OK Button (5, Figure 4-62) to toggle the symbol
to the Limitation being disabled.
Delete Virtual Walls Limitation Procedure
To delete a Virtual Wall the following steps can be used:
1. Select the Virtual Wall Limitation Screen
(6, Figure 4-108) on the WRL Menu Group Screen
(Figure 4-108).
2. Use the Right Arrow (4, Figure 4-62) Function to
highlight the Virtual Wall Number (1, Figure 4-113).
3. If the wall number shown is not the correct number for
wall to be disabled, use an OK Button (5, Figure 4-62) to
allow you to modify the value. (In other words, be sure
that the number of walls you set matches the Virtual
Walls Number (Item 1), (Figure 4-113).
4. Use the Left Arrow and/or Right Arrow (4, Figure 4-62)
key to highlight the “X” or the Remove Virtual Walls
Symbol (5, Figure 4-113). Use an OK Button
(5, Figure 4-62) or the Jog Dial (5, Figure 4-63) to delete
the wall.
To Next Page
Loading...
Need help?
General
