McHale Fusion 2 round baler wrapper technical service manual
Issue 1: 0208
McHale Fusion 2 generic safety section
04-1
4. General Safety
4.1 Be aware of all safety information
The symbol opposite is the symbol used to alert you to safety
issues. It appears both in this manual and on some of the safety
decals. On the decals it appears on a yellow background while in
this manual it appears in black and white.
Follow all safety precautions and practice safe operation of all
machinery at all times.
When reading through this manual, pay attention to where you see the above
symbol paying extra care to where you will see the Warning and Caution pointers.
4.2 Follow all safety instructions
Using this manual, read all safety instructions, messages and be
aware of the meanings of all safety decals. Ensure, if safety decals
are damaged or missing due to wear and tear or due to component
replacement, that they be replaced. Use the Decals section in the
provided spare parts book as a handy reference for spare part
codes and relevant decals, which are available from your McHale
dealer.
As with all machinery, learn all operations and use of controls by reading this
manual thoroughly. Do not attempt to let anyone operate this machine without
being fully instructed.
4.3 Store all items carefully
Store all attachments such as spare net rolls, film rolls and any
other stored items in a secure and safe manner so as to prevent
items from falling. Keep storage areas clear of bystanders and
children.
4.4 Protective clothing
Always wear clothing and safety equipment that is fit for the job
at hand, never wear loose clothing. In the event of loud noises,
wear suitable protective hearing devices. Use of radio (walkman)
headphones are not recommended while operating machinery
as this impairs operators attention.
To Next Page
Loading...
