McHale Fusion 2 - Check Roll Pins; Bolts on the Knife Holder Bracket; Check Spiral Pins on Tine Bars

McHale Fusion 2 maintenance section
10-6
McHale Fusion 2 round baler wrapper technical service manual
Issue 1: 0208
10.2.7 Check roll pins/ bolts on the knife holder brackets
Check roll pins for knife holders
10.2.8 Check spiral pins on tine bars
Check the four spiral pins on each tine
bars and replace if
necessary .
Spiral pins should be replaced every
10,000 bales.