McHale Fusion 2 round baler wrapper technical service manual
Issue 1: 0208
McHale Fusion 2 generic safety section
04-3
4.9 General safety warnings
¾ Read and understand this operator’s manual before using the machine. If any
of the instructions appear unclear do not hesitate to contact your McHale
dealer.
¾ Only competent persons who have read and fully understood this manual are
qualified to operate this machine. The owner of this machine is obliged by law
to ensure that every operator must understand all the functions, controls,
working processes and safety warnings before operating the machine.
¾ All safety devices such as guards, protection parts and safety controls must
be in place and in fully functioning condition. It is forbidden to operate this
machine with defective or incomplete safety devices (never disable or defeat
any electrical safety circuits).
¾ All safety decals on the machine must be kept in good condition. If they are
not, they must be replaced by genuine McHale decals from your McHale
dealer (part numbers are available in this manual).
¾ Before operating this machine, the operator must ensure that all covers are
closed and all safety devices are in operating mode.
¾ Before operating this machine the operator must ensure that the
manufacturer’s instructions for attaching and detaching the machine are
followed. This includes the drawbar attachment, the electric and hydraulic
lines, in particular the lighting and brake system.
To Next Page
Loading...
