POWERHEAD
Page 4-20 90-826883R2 JUNE 1998
IMPORTANT: Keep the same connecting rod, cap, cage and roller bearings (if re-
used) together and install them in their original location on the crankshaft.
3. Remove (and discard) rod bolts and remove piston and rod assembly from crank-
shaft.
57099
a
a
a - Rod Bolts (discard)
4. While supporting piston, use Piston Pin Tool 91-76160A2 and soft faced mallet to
drive piston pin from piston.
b
57100
a
a - Piston Pin Tool (91-76160A2)
b - Piston Pin
To Next Page
Loading...
